De AudioControl LC-5.1300 is een krachtige 5 kanaals versterker voorzien van het gepatenteerde accubass processing systeem van dit USA merk.
Making Good Sound Great
Audio Control LC5.1300
Klasse D 5 kanaals versterker
4 x 100 + 300 watts RMS 4 ohms
4 x 200 + 500 watts RMS 2 ohms
2 x 400 + 300 watts RMS 4 ohms
Frequentiebereik: 20 - 22.000 Hz
3-weg Linkwitz-Riley x-over 30 - 5000 Hz
AccuBASS® Processing
MILC™ Maximum Input Level Control (Patent Pending)
GTO™ Signal Sense
PFM Subsonic Filter 24 Hz
Optional ACR-1 assignable remote control
Solid One-Piece Aluminum Chassis
RCA & high level ingangen
Afgezekerd met 4 x 30A
Afm: 305 x 53 x 203 mm
Extra informatie:
Building from the hugely successful LC-4.800 multi-channel amplifier, the LC-5.1300 is surely the most flexible 5 channel amplifier on the market. Featuring eight active speaker level inputs with summing, coupled with an intuitive three-way Linkwitz-Riley crossover network, the LC-5.1300 can be easily integrated with most factory installed source units. The patented AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance.
More control and features include our GTO Signal Sense, MILC Source Clip Detection and assignable Remote Level Control. The LC-5.1300 builds on the legacy of audio passion and a focus on user-friendly features, making this a perfect solution based amplifier.
All features at a glance
GTO Signal Sense
Many cars can turn on the factory amplifier even if the source unit is off (Alarms, Cell phones, etc). To prevent this from turning your system on unexpectedly, you can bypass the GTO™ circuit by moving the GTO™ jumper, and using an applied 12-volts at the Remote In terminal. Using the jumper may result in some factory features not working fully.
AccuBASS® Processing
Factory installed amplifiers and woofers are (unfortunately) not designed to reproduce bass at high volumes. Car manufacturers adapt to this by taking the bass out of the signal when you turn up the volume. AudioControl developed the patent pending AccuBASS™ circuit to restore bass. After a quick and easy one-time setting, the AccuBASS™ circuit takes over the bass just as the factory system rolls off. You get smooth, seamless, and rock solid bass response regardless of volume level.
MILC™ Source Clip LED
The MILC™ (Maximum Input Level Control) patent-pending level-setting circuit prevents clipping and damaging distortion. It calculates when the waveform of an incoming audio signal on input 1 and 2 is clipping, and if it is, this LED will fulfill its prime objective and shine forth. With this advanced feature, you are able to optimize the level of the incoming audio signals until the Source Clip LED is just-prior to lighting. If the LED comes on during normal operation, you should adjust the level of the audio signals before they reach the LC-6.1200.
Remote Level Control ACR-1 (Optional)
The AudioControl ACR-1 dash control is a remote level for your LC-6.1200 amplifier. It may be mounted under the dash using its own enclosure, or through a custom hole in the dash. The knob should be within reach of the driver, and in a spot where the LED is plainly visible. Disconnect the vehicle battery +12V and Ground connections before installation.