Product toegevoegd aan jouw offerte. Ga naar de offertepagina om jouw offerte aan te vragen. Wij nemen dan zo spoedig mogelijk contact met je op.
Productomschrijving
Gladen MIQ4
4 kanaals klasse D micro versterker (9 - 16V)
Frequentie bereik: 10 - 30.000 Hz
4 x 60 watts RMS 4 ohms
4 x 100 watts RMS 2 ohms
2 x 200 watts RMS 4 ohms mono gebrugt
High-Low-Full filters: 40 - 250 Hz / 12 dB
Start-Stop ready: 7V / 10 Seconden
RCA low & auto high level via molex
Afm: 90x 35 x 116 mm
Extra informatie:
Measuring 116 x 90 mm, the MiQ⁴ takes up less space than a postcard. Yet this compact Class-D amplifier delivers four channels of 60 watts RMS at 4 ohms or four channels of 100 watts RMS at 2 ohms. This allows it to power a complete front and rear speaker system with precision, without requiring much installation space for the amplifier.
The four-channel high-level input connects directly to the speaker outputs of the factory or aftermarket radio. No additional signal converter is required. If no remote output is available, Auto Sense automatically powers on the amplifier.
The MiQ⁴ features two separately adjustable filter sections for the front and rear. Both channel pairs can be operated as high-pass, full-range, or low-pass filters. The crossover frequency can be set between 40 and 250 Hz for each channel. This allows the amplifier to drive both a classic four-channel speaker system and various combinations of speakers and subwoofers.
If you want to expand the system later, you can use the two-channel low-level output. The input signal is available via a pair of RCA connectors in the wiring harness and can be routed to another amplifier without needing to tap into the factory radio again.
Telefonisch en via whatsapp beschikbaar van Ma - Za 9:00 - 21:00
Delen
Productomschrijving
Gladen MIQ4
4 kanaals klasse D micro versterker (9 - 16V)
Frequentie bereik: 10 - 30.000 Hz
4 x 60 watts RMS 4 ohms
4 x 100 watts RMS 2 ohms
2 x 200 watts RMS 4 ohms mono gebrugt
High-Low-Full filters: 40 - 250 Hz / 12 dB
Start-Stop ready: 7V / 10 Seconden
RCA low & auto high level via molex
Afm: 90x 35 x 116 mm
Extra informatie:
Measuring 116 x 90 mm, the MiQ⁴ takes up less space than a postcard. Yet this compact Class-D amplifier delivers four channels of 60 watts RMS at 4 ohms or four channels of 100 watts RMS at 2 ohms. This allows it to power a complete front and rear speaker system with precision, without requiring much installation space for the amplifier.
The four-channel high-level input connects directly to the speaker outputs of the factory or aftermarket radio. No additional signal converter is required. If no remote output is available, Auto Sense automatically powers on the amplifier.
The MiQ⁴ features two separately adjustable filter sections for the front and rear. Both channel pairs can be operated as high-pass, full-range, or low-pass filters. The crossover frequency can be set between 40 and 250 Hz for each channel. This allows the amplifier to drive both a classic four-channel speaker system and various combinations of speakers and subwoofers.
If you want to expand the system later, you can use the two-channel low-level output. The input signal is available via a pair of RCA connectors in the wiring harness and can be routed to another amplifier without needing to tap into the factory radio again.